Key FeaturesAdjustable Lab Coater with Digital Micrometer
High-precision micrometer :
Adjust the scraper gap up and down by twisting the high-precision micrometer, adjustable in units of 10μm.
Scraper easy to disassemble and clean:
Adopt magnetic design to adsorb the scraper, easy to clean.
Dual support bar design :
Effectively disperses the weight and enhances the support and stability of the overall structure.
How to use
1. Place the applicator on a perfectly flat test surface. Adjust the squeegee so that the required gap is twice the amount of wet film thickness required.
2. In front of the applicator, pour a small amount of test sample onto the end plate at a slow, even rate of about 1-2 cm per second.
3. Move the instrument over the surface until all of the liquid has been applied and or any remaining liquid has been removed from the end of the coating path.
4. The exact ratio of wet film thickness to any coater gap depends on the material used, the viscosity and texture of the liquid.
5. The actual wet film to be applied should be adjusted to your desired thickness using a thickness gauge to adjust the gap.
description2
Product parameters
| Model | IA-001 |
| Coating width | 100/150/200/250/300 mm |
| Coating thickness | 0-3500μm |
| Indexing value | 10μm |
| Coating accuracy | ±2μm |
| Material | aluminum alloy |
01